MakeItFrom.com
Menu (ESC)

EN AC-71100 Aluminum vs. EN 1.4935 Stainless Steel

EN AC-71100 aluminum belongs to the aluminum alloys classification, while EN 1.4935 stainless steel belongs to the iron alloys. There are 27 material properties with values for both materials. Properties with values for just one material (6, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN AC-71100 aluminum and the bottom bar is EN 1.4935 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 72
200
Elongation at Break, % 1.1
16 to 18
Fatigue Strength, MPa 150
350 to 400
Poisson's Ratio 0.32
0.28
Shear Modulus, GPa 27
76
Tensile Strength: Ultimate (UTS), MPa 260
780 to 880
Tensile Strength: Yield (Proof), MPa 230
570 to 670

Thermal Properties

Latent Heat of Fusion, J/g 490
270
Maximum Temperature: Mechanical, °C 170
740
Melting Completion (Liquidus), °C 580
1460
Melting Onset (Solidus), °C 520
1420
Specific Heat Capacity, J/kg-K 860
470
Thermal Expansion, µm/m-K 22
11

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 32
2.9
Electrical Conductivity: Equal Weight (Specific), % IACS 97
3.3

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
9.0
Density, g/cm3 2.9
7.8
Embodied Carbon, kg CO2/kg material 7.4
2.9
Embodied Energy, MJ/kg 140
42
Embodied Water, L/kg 1010
100

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 2.8
130
Resilience: Unit (Modulus of Resilience), kJ/m3 360
830 to 1160
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 47
25
Strength to Weight: Axial, points 25
28 to 31
Strength to Weight: Bending, points 31
24 to 26
Thermal Shock Resistance, points 12
27 to 30

Alloy Composition

Aluminum (Al), % 78.7 to 83.3
0
Carbon (C), % 0
0.17 to 0.24
Chromium (Cr), % 0
11 to 12.5
Copper (Cu), % 0 to 0.1
0
Iron (Fe), % 0 to 0.3
83 to 86.7
Magnesium (Mg), % 0.2 to 0.5
0
Manganese (Mn), % 0 to 0.15
0.3 to 0.8
Molybdenum (Mo), % 0
0.8 to 1.2
Nickel (Ni), % 0
0.3 to 0.8
Phosphorus (P), % 0
0 to 0.025
Silicon (Si), % 7.5 to 9.5
0.1 to 0.5
Sulfur (S), % 0
0 to 0.015
Titanium (Ti), % 0 to 0.15
0
Tungsten (W), % 0
0.4 to 0.6
Vanadium (V), % 0
0.2 to 0.35
Zinc (Zn), % 9.0 to 10.5
0
Residuals, % 0 to 0.15
0