MakeItFrom.com
Menu (ESC)

EN AC-71100 Aluminum vs. S15700 Stainless Steel

EN AC-71100 aluminum belongs to the aluminum alloys classification, while S15700 stainless steel belongs to the iron alloys. There are 28 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN AC-71100 aluminum and the bottom bar is S15700 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 110
200 to 460
Elastic (Young's, Tensile) Modulus, GPa 72
200
Elongation at Break, % 1.1
1.1 to 29
Fatigue Strength, MPa 150
370 to 770
Poisson's Ratio 0.32
0.28
Shear Modulus, GPa 27
77
Tensile Strength: Ultimate (UTS), MPa 260
1180 to 1890
Tensile Strength: Yield (Proof), MPa 230
500 to 1770

Thermal Properties

Latent Heat of Fusion, J/g 490
290
Maximum Temperature: Mechanical, °C 170
870
Melting Completion (Liquidus), °C 580
1440
Melting Onset (Solidus), °C 520
1400
Specific Heat Capacity, J/kg-K 860
480
Thermal Expansion, µm/m-K 22
11

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 32
2.3
Electrical Conductivity: Equal Weight (Specific), % IACS 97
2.6

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
15
Density, g/cm3 2.9
7.8
Embodied Carbon, kg CO2/kg material 7.4
3.4
Embodied Energy, MJ/kg 140
47
Embodied Water, L/kg 1010
140

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 2.8
17 to 270
Resilience: Unit (Modulus of Resilience), kJ/m3 360
640 to 4660
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 47
25
Strength to Weight: Axial, points 25
42 to 67
Strength to Weight: Bending, points 31
32 to 43
Thermal Shock Resistance, points 12
39 to 63

Alloy Composition

Aluminum (Al), % 78.7 to 83.3
0.75 to 1.5
Carbon (C), % 0
0 to 0.090
Chromium (Cr), % 0
14 to 16
Copper (Cu), % 0 to 0.1
0
Iron (Fe), % 0 to 0.3
69.6 to 76.8
Magnesium (Mg), % 0.2 to 0.5
0
Manganese (Mn), % 0 to 0.15
0 to 1.0
Molybdenum (Mo), % 0
2.0 to 3.0
Nickel (Ni), % 0
6.5 to 7.7
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 7.5 to 9.5
0 to 1.0
Sulfur (S), % 0
0 to 0.030
Titanium (Ti), % 0 to 0.15
0
Zinc (Zn), % 9.0 to 10.5
0
Residuals, % 0 to 0.15
0