MakeItFrom.com
Menu (ESC)

EN-MC21120 Magnesium vs. Commercially Pure Silver

EN-MC21120 magnesium belongs to the magnesium alloys classification, while commercially pure silver belongs to the otherwise unclassified metals. There are 21 material properties with values for both materials. Properties with values for just one material (10, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN-MC21120 magnesium and the bottom bar is commercially pure silver.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 46
71
Elongation at Break, % 2.2 to 6.7
1.1 to 29
Poisson's Ratio 0.29
0.37
Shear Modulus, GPa 18
26
Shear Strength, MPa 110 to 160
120 to 190
Tensile Strength: Ultimate (UTS), MPa 200 to 270
190 to 340

Thermal Properties

Latent Heat of Fusion, J/g 350
110
Melting Completion (Liquidus), °C 600
960
Melting Onset (Solidus), °C 490
960
Specific Heat Capacity, J/kg-K 990
240
Thermal Conductivity, W/m-K 76
420
Thermal Expansion, µm/m-K 26
20

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 11
100
Electrical Conductivity: Equal Weight (Specific), % IACS 59
87

Otherwise Unclassified Properties

Density, g/cm3 1.7
10

Common Calculations

Stiffness to Weight: Axial, points 15
3.8
Stiffness to Weight: Bending, points 69
13
Strength to Weight: Axial, points 31 to 43
4.9 to 8.9
Strength to Weight: Bending, points 43 to 53
6.9 to 10
Thermal Diffusivity, mm2/s 44
170
Thermal Shock Resistance, points 11 to 16
9.5 to 17

Alloy Composition

Aluminum (Al), % 8.3 to 9.7
0
Copper (Cu), % 0 to 0.030
0
Iron (Fe), % 0 to 0.0050
0
Magnesium (Mg), % 88.6 to 91.3
0
Manganese (Mn), % 0.1 to 0.5
0
Nickel (Ni), % 0 to 0.0020
0
Silicon (Si), % 0 to 0.2
0
Silver (Ag), % 0
99.9 to 100
Zinc (Zn), % 0.35 to 1.0
0
Residuals, % 0
0 to 0.1