MakeItFrom.com
Menu (ESC)

ISO-WD32350 Magnesium vs. Commercially Pure Silver

ISO-WD32350 magnesium belongs to the magnesium alloys classification, while commercially pure silver belongs to the otherwise unclassified metals. There are 21 material properties with values for both materials. Properties with values for just one material (9, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is ISO-WD32350 magnesium and the bottom bar is commercially pure silver.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 45
71
Elongation at Break, % 5.7 to 10
1.1 to 29
Poisson's Ratio 0.29
0.37
Shear Modulus, GPa 18
26
Shear Strength, MPa 150 to 170
120 to 190
Tensile Strength: Ultimate (UTS), MPa 250 to 290
190 to 340

Thermal Properties

Latent Heat of Fusion, J/g 340
110
Melting Completion (Liquidus), °C 600
960
Melting Onset (Solidus), °C 560
960
Specific Heat Capacity, J/kg-K 990
240
Thermal Conductivity, W/m-K 130
420
Thermal Expansion, µm/m-K 25
20

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 25
100
Electrical Conductivity: Equal Weight (Specific), % IACS 130
87

Otherwise Unclassified Properties

Density, g/cm3 1.7
10

Common Calculations

Stiffness to Weight: Axial, points 15
3.8
Stiffness to Weight: Bending, points 68
13
Strength to Weight: Axial, points 39 to 46
4.9 to 8.9
Strength to Weight: Bending, points 50 to 55
6.9 to 10
Thermal Diffusivity, mm2/s 73
170
Thermal Shock Resistance, points 16 to 18
9.5 to 17

Alloy Composition

Aluminum (Al), % 0 to 0.1
0
Copper (Cu), % 0 to 0.1
0
Iron (Fe), % 0 to 0.060
0
Magnesium (Mg), % 95.7 to 97.7
0
Manganese (Mn), % 0.6 to 1.3
0
Nickel (Ni), % 0 to 0.0050
0
Silicon (Si), % 0 to 0.1
0
Silver (Ag), % 0
99.9 to 100
Zinc (Zn), % 1.8 to 2.3
0
Residuals, % 0
0 to 0.1

Comparable Variants