PCL vs. PPO
Both PCL and PPO are thermoplastics. There are 6 material properties with values for both materials. Properties with values for just one material (18, in this case) are not shown.
For each property being compared, the top bar is PCL and the bottom bar is PPO.
Metric UnitsUS Customary Units
Material Properties
Density, g/cm3 | 1.1 | |
1.1 to 1.4 |
Elongation at Break, % | 300 | |
3.5 to 28 |
Maximum Temperature: Mechanical, °C | 40 | |
100 to 110 |
Strength to Weight: Axial, points | 2.5 | |
16 to 27 |
Strength to Weight: Bending, points | 9.4 | |
33 to 42 |
Tensile Strength: Ultimate (UTS), MPa | 10 | |
63 to 140 |