MakeItFrom.com
Menu (ESC)

SAE-AISI 9310 Steel vs. 6360 Aluminum

SAE-AISI 9310 steel belongs to the iron alloys classification, while 6360 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is SAE-AISI 9310 steel and the bottom bar is 6360 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 190
68
Elongation at Break, % 17 to 19
9.0 to 18
Fatigue Strength, MPa 300 to 390
31 to 67
Poisson's Ratio 0.29
0.33
Shear Modulus, GPa 73
26
Shear Strength, MPa 510 to 570
76 to 130
Tensile Strength: Ultimate (UTS), MPa 820 to 910
120 to 220
Tensile Strength: Yield (Proof), MPa 450 to 570
57 to 170

Thermal Properties

Latent Heat of Fusion, J/g 250
400
Maximum Temperature: Mechanical, °C 440
160
Melting Completion (Liquidus), °C 1460
640
Melting Onset (Solidus), °C 1420
630
Specific Heat Capacity, J/kg-K 470
900
Thermal Conductivity, W/m-K 48
210
Thermal Expansion, µm/m-K 13
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 7.7
54
Electrical Conductivity: Equal Weight (Specific), % IACS 8.9
180

Otherwise Unclassified Properties

Base Metal Price, % relative 4.4
9.5
Density, g/cm3 7.9
2.7
Embodied Carbon, kg CO2/kg material 1.8
8.3
Embodied Energy, MJ/kg 24
150
Embodied Water, L/kg 57
1190

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 120 to 150
14 to 19
Resilience: Unit (Modulus of Resilience), kJ/m3 540 to 860
24 to 210
Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 24
50
Strength to Weight: Axial, points 29 to 32
13 to 23
Strength to Weight: Bending, points 25 to 27
20 to 30
Thermal Diffusivity, mm2/s 13
86
Thermal Shock Resistance, points 24 to 27
5.5 to 9.9

Alloy Composition

Aluminum (Al), % 0
97.8 to 99.3
Carbon (C), % 0.080 to 0.13
0
Chromium (Cr), % 1.0 to 1.4
0 to 0.050
Copper (Cu), % 0
0 to 0.15
Iron (Fe), % 93.8 to 95.2
0.1 to 0.3
Magnesium (Mg), % 0
0.25 to 0.45
Manganese (Mn), % 0.45 to 0.65
0.020 to 0.15
Molybdenum (Mo), % 0.080 to 0.15
0
Nickel (Ni), % 3.0 to 3.5
0
Phosphorus (P), % 0 to 0.015
0
Silicon (Si), % 0.2 to 0.35
0.35 to 0.8
Sulfur (S), % 0 to 0.012
0
Titanium (Ti), % 0
0 to 0.1
Zinc (Zn), % 0
0 to 0.1
Residuals, % 0
0 to 0.15