Thermoplastic PI vs. PPO
Both thermoplastic PI and PPO are thermoplastics. There are 9 material properties with values for both materials. Properties with values for just one material (15, in this case) are not shown.
For each property being compared, the top bar is thermoplastic PI and the bottom bar is PPO.
Metric UnitsUS Customary Units
Material Properties
| Density, g/cm3 | 1.4 to 1.5 | |
| 1.1 to 1.4 |
| Elongation at Break, % | 1.8 to 7.5 | |
| 3.5 to 28 |
| Flexural Modulus, GPa | 3.8 to 19 | |
| 2.5 to 8.6 |
| Flexural Strength, MPa | 170 to 330 | |
| 92 to 140 |
| Limiting Oxygen Index (LOI), % | 35 | |
| 32 |
| Specific Heat Capacity, J/kg-K | 970 to 1100 | |
| 1020 to 1250 |
| Strength to Weight: Axial, points | 22 to 42 | |
| 16 to 27 |
| Strength to Weight: Bending, points | 36 to 57 | |
| 33 to 42 |
| Tensile Strength: Ultimate (UTS), MPa | 110 to 220 | |
| 63 to 140 |