MakeItFrom.com
Menu (ESC)

C12000 Copper vs. 4007 Aluminum

C12000 copper belongs to the copper alloys classification, while 4007 aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is C12000 copper and the bottom bar is 4007 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 120
71
Elongation at Break, % 2.8 to 50
5.1 to 23
Poisson's Ratio 0.34
0.33
Shear Modulus, GPa 43
27
Shear Strength, MPa 160 to 240
80 to 90
Tensile Strength: Ultimate (UTS), MPa 230 to 410
130 to 160
Tensile Strength: Yield (Proof), MPa 77 to 400
50 to 120

Thermal Properties

Latent Heat of Fusion, J/g 210
410
Maximum Temperature: Mechanical, °C 200
170
Melting Completion (Liquidus), °C 1080
650
Melting Onset (Solidus), °C 1080
590
Specific Heat Capacity, J/kg-K 390
890
Thermal Conductivity, W/m-K 390
170
Thermal Expansion, µm/m-K 17
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 98
42
Electrical Conductivity: Equal Weight (Specific), % IACS 98
140

Otherwise Unclassified Properties

Base Metal Price, % relative 31
9.5
Density, g/cm3 9.0
2.8
Embodied Carbon, kg CO2/kg material 2.6
8.1
Embodied Energy, MJ/kg 41
150
Embodied Water, L/kg 310
1160

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 10 to 91
7.4 to 23
Resilience: Unit (Modulus of Resilience), kJ/m3 25 to 690
18 to 110
Stiffness to Weight: Axial, points 7.2
14
Stiffness to Weight: Bending, points 18
49
Strength to Weight: Axial, points 7.2 to 13
12 to 15
Strength to Weight: Bending, points 9.4 to 14
20 to 23
Thermal Diffusivity, mm2/s 110
67
Thermal Shock Resistance, points 8.2 to 15
5.5 to 6.7

Alloy Composition

Aluminum (Al), % 0
94.1 to 97.6
Chromium (Cr), % 0
0.050 to 0.25
Cobalt (Co), % 0
0 to 0.050
Copper (Cu), % 99.9 to 99.996
0 to 0.2
Iron (Fe), % 0
0.4 to 1.0
Magnesium (Mg), % 0
0 to 0.2
Manganese (Mn), % 0
0.8 to 1.5
Nickel (Ni), % 0
0.15 to 0.7
Phosphorus (P), % 0.0040 to 0.012
0
Silicon (Si), % 0
1.0 to 1.7
Titanium (Ti), % 0
0 to 0.1
Zinc (Zn), % 0
0 to 0.1
Residuals, % 0
0 to 0.15