MakeItFrom.com
Menu (ESC)

C12600 Copper vs. 711.0 Aluminum

C12600 copper belongs to the copper alloys classification, while 711.0 aluminum belongs to the aluminum alloys. There are 28 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is C12600 copper and the bottom bar is 711.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 120
71
Elongation at Break, % 56
7.8
Poisson's Ratio 0.34
0.32
Shear Modulus, GPa 56
27
Tensile Strength: Ultimate (UTS), MPa 270
220
Tensile Strength: Yield (Proof), MPa 69
140

Thermal Properties

Latent Heat of Fusion, J/g 210
380
Maximum Temperature: Mechanical, °C 200
170
Melting Completion (Liquidus), °C 1080
640
Melting Onset (Solidus), °C 1030
610
Specific Heat Capacity, J/kg-K 390
860
Thermal Conductivity, W/m-K 130
160
Thermal Expansion, µm/m-K 17
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 29
40
Electrical Conductivity: Equal Weight (Specific), % IACS 29
120

Otherwise Unclassified Properties

Base Metal Price, % relative 30
9.5
Density, g/cm3 8.9
3.0
Embodied Carbon, kg CO2/kg material 2.6
7.9
Embodied Energy, MJ/kg 41
150
Embodied Water, L/kg 310
1120

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 110
15
Resilience: Unit (Modulus of Resilience), kJ/m3 21
140
Stiffness to Weight: Axial, points 7.2
13
Stiffness to Weight: Bending, points 18
45
Strength to Weight: Axial, points 8.2
20
Strength to Weight: Bending, points 10
26
Thermal Diffusivity, mm2/s 39
61
Thermal Shock Resistance, points 9.5
9.3

Alloy Composition

Aluminum (Al), % 0
89.8 to 92.7
Copper (Cu), % 99.5 to 99.8
0.35 to 0.65
Iron (Fe), % 0
0.7 to 1.4
Magnesium (Mg), % 0
0.25 to 0.45
Manganese (Mn), % 0
0 to 0.050
Phosphorus (P), % 0.2 to 0.4
0
Silicon (Si), % 0
0 to 0.3
Titanium (Ti), % 0
0 to 0.2
Zinc (Zn), % 0
6.0 to 7.0
Residuals, % 0
0 to 0.15