MakeItFrom.com
Menu (ESC)

R30605 Cobalt vs. SAE-AISI 1213 Steel

R30605 cobalt belongs to the cobalt alloys classification, while SAE-AISI 1213 steel belongs to the iron alloys. There are 25 material properties with values for both materials. Properties with values for just one material (7, in this case) are not shown.

For each property being compared, the top bar is R30605 cobalt and the bottom bar is SAE-AISI 1213 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 210
190
Elongation at Break, % 34
11 to 29
Fatigue Strength, MPa 260 to 590
200 to 290
Poisson's Ratio 0.29
0.29
Shear Modulus, GPa 81
73
Tensile Strength: Ultimate (UTS), MPa 1130 to 1900
440 to 600
Tensile Strength: Yield (Proof), MPa 470 to 1600
260 to 470

Thermal Properties

Latent Heat of Fusion, J/g 290
250
Melting Completion (Liquidus), °C 1410
1460
Melting Onset (Solidus), °C 1330
1420
Specific Heat Capacity, J/kg-K 410
470
Thermal Conductivity, W/m-K 9.6
51
Thermal Expansion, µm/m-K 12
12

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.0
7.0
Electrical Conductivity: Equal Weight (Specific), % IACS 1.8
8.1

Otherwise Unclassified Properties

Density, g/cm3 9.6
7.8
Embodied Carbon, kg CO2/kg material 9.8
1.4
Embodied Energy, MJ/kg 140
18
Embodied Water, L/kg 450
46

Common Calculations

Stiffness to Weight: Axial, points 12
13
Stiffness to Weight: Bending, points 21
24
Strength to Weight: Axial, points 33 to 55
16 to 21
Strength to Weight: Bending, points 25 to 36
17 to 20
Thermal Diffusivity, mm2/s 2.5
14
Thermal Shock Resistance, points 31 to 52
14 to 19

Alloy Composition

Carbon (C), % 0.050 to 0.15
0 to 0.13
Chromium (Cr), % 19 to 21
0
Cobalt (Co), % 46.4 to 57
0
Iron (Fe), % 0 to 3.0
98.4 to 99
Manganese (Mn), % 1.0 to 2.0
0.7 to 1.0
Nickel (Ni), % 9.0 to 11
0
Phosphorus (P), % 0 to 0.040
0.070 to 0.12
Silicon (Si), % 0 to 0.4
0
Sulfur (S), % 0 to 0.030
0.24 to 0.33
Tungsten (W), % 14 to 16
0

Comparable Variants