MakeItFrom.com
Menu (ESC)

S44536 Stainless Steel vs. 7020 Aluminum

S44536 stainless steel belongs to the iron alloys classification, while 7020 aluminum belongs to the aluminum alloys. There are 31 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is S44536 stainless steel and the bottom bar is 7020 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 170
45 to 100
Elastic (Young's, Tensile) Modulus, GPa 200
70
Elongation at Break, % 22
8.4 to 14
Fatigue Strength, MPa 190
110 to 130
Poisson's Ratio 0.27
0.33
Shear Modulus, GPa 78
26
Shear Strength, MPa 290
110 to 230
Tensile Strength: Ultimate (UTS), MPa 460
190 to 390
Tensile Strength: Yield (Proof), MPa 280
120 to 310

Thermal Properties

Latent Heat of Fusion, J/g 290
380
Maximum Temperature: Mechanical, °C 990
210
Melting Completion (Liquidus), °C 1440
650
Melting Onset (Solidus), °C 1390
610
Specific Heat Capacity, J/kg-K 480
880
Thermal Conductivity, W/m-K 21
150
Thermal Expansion, µm/m-K 11
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.6
39
Electrical Conductivity: Equal Weight (Specific), % IACS 3.0
120

Otherwise Unclassified Properties

Base Metal Price, % relative 13
9.5
Density, g/cm3 7.7
2.9
Embodied Carbon, kg CO2/kg material 2.8
8.3
Embodied Energy, MJ/kg 41
150
Embodied Water, L/kg 140
1150

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 89
23 to 46
Resilience: Unit (Modulus of Resilience), kJ/m3 200
110 to 690
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 25
47
Strength to Weight: Axial, points 17
18 to 37
Strength to Weight: Bending, points 17
25 to 41
Thermal Diffusivity, mm2/s 5.6
59
Thermal Shock Resistance, points 16
8.3 to 17

Alloy Composition

Aluminum (Al), % 0
91.2 to 94.8
Carbon (C), % 0 to 0.015
0
Chromium (Cr), % 20 to 23
0.1 to 0.35
Copper (Cu), % 0
0 to 0.2
Iron (Fe), % 72.8 to 80
0 to 0.4
Magnesium (Mg), % 0
1.0 to 1.4
Manganese (Mn), % 0 to 1.0
0.050 to 0.5
Nickel (Ni), % 0 to 0.5
0
Niobium (Nb), % 0.050 to 0.8
0
Nitrogen (N), % 0 to 0.015
0
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 0 to 1.0
0 to 0.35
Sulfur (S), % 0 to 0.030
0
Titanium (Ti), % 0 to 0.8
0 to 0.25
Zinc (Zn), % 0
4.0 to 5.0
Zirconium (Zr), % 0
0.080 to 0.25
Residuals, % 0
0 to 0.15