EN 1.0107 (P195TR1) Non-Alloy Steel
EN 1.0107 steel is a carbon (non-alloy) steel formulated for primary forming into wrought products. Cited properties are appropriate for the hot worked condition. 1.0107 is the EN numeric designation for this material. P195TR1 is the EN chemical designation.
It has a fairly high ductility and a fairly low tensile strength among wrought carbon or non-alloy steels.
The graph bars on the material properties cards below compare EN 1.0107 steel to: wrought carbon or non-alloy steels (top), all iron alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
Mechanical Properties
Brinell Hardness
110
Elastic (Young's, Tensile) Modulus
190 GPa 27 x 106 psi
Elongation at Break
29 %
Fatigue Strength
160 MPa 23 x 103 psi
Impact Strength: V-Notched Charpy
38 J 28 ft-lb
Poisson's Ratio
0.29
Shear Modulus
73 GPa 11 x 106 psi
Shear Strength
250 MPa 36 x 103 psi
Tensile Strength: Ultimate (UTS)
380 MPa 55 x 103 psi
Tensile Strength: Yield (Proof)
210 MPa 30 x 103 psi
Thermal Properties
Latent Heat of Fusion
250 J/g
Maximum Temperature: Mechanical
400 °C 750 °F
Melting Completion (Liquidus)
1460 °C 2670 °F
Melting Onset (Solidus)
1420 °C 2590 °F
Specific Heat Capacity
470 J/kg-K 0.11 BTU/lb-°F
Thermal Conductivity
51 W/m-K 29 BTU/h-ft-°F
Thermal Expansion
12 µm/m-K
Electrical Properties
Electrical Conductivity: Equal Volume
7.1 % IACS
Electrical Conductivity: Equal Weight (Specific)
8.2 % IACS
Otherwise Unclassified Properties
Base Metal Price
2.1 % relative
Density
7.9 g/cm3 490 lb/ft3
Embodied Carbon
1.5 kg CO2/kg material
Embodied Energy
19 MJ/kg 8.2 x 103 BTU/lb
Embodied Water
47 L/kg 5.6 gal/lb
Common Calculations
Resilience: Ultimate (Unit Rupture Work)
95 MJ/m3
Resilience: Unit (Modulus of Resilience)
110 kJ/m3
Stiffness to Weight: Axial
13 points
Stiffness to Weight: Bending
24 points
Strength to Weight: Axial
13 points
Strength to Weight: Bending
15 points
Thermal Diffusivity
14 mm2/s
Thermal Shock Resistance
12 points
Alloy Composition
| Fe | 97.7 to 100 | |
| Mn | 0 to 0.7 | |
| Si | 0 to 0.35 | |
| Cr | 0 to 0.3 | |
| Ni | 0 to 0.3 | |
| Cu | 0 to 0.3 | |
| C | 0 to 0.13 | |
| Mo | 0 to 0.080 | |
| Ti | 0 to 0.040 | |
| P | 0 to 0.025 | |
| S | 0 to 0.020 | |
| V | 0 to 0.020 | |
| Nb | 0 to 0.010 |
All values are % weight. Ranges represent what is permitted under applicable standards.
Followup Questions
Similar Alloys
Further Reading
EN 10217-1: Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
Pressure Vessels: External Pressure Technology, 2nd ed., Carl T. F. Ross, 2011
Carbon Steel Handbook, D. Gandy, 2007
Ferrous Materials: Steel and Cast Iron, Hans Berns and Werner Theisen, 2008
Steels: Processing, Structure, and Performance, 2nd ed., George Krauss, 2015