Precipitation Hardened (+P930) 1.4594 Stainless Steel
EN 1.4594 +P930 steel is EN 1.4594 stainless steel in the aged (precipitation hardened) condition. It has the lowest strength and highest ductility compared to the other variants of EN 1.4594 stainless steel.
The graph bars on the material properties cards below compare EN 1.4594 +P930 steel to: wrought precipitation-hardening stainless steels (top), all iron alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
Mechanical Properties
Elastic (Young's, Tensile) Modulus
200 GPa 28 x 106 psi
Elongation at Break
17 %
Fatigue Strength
490 MPa 71 x 103 psi
Impact Strength: V-Notched Charpy
46 J 34 ft-lb
Poisson's Ratio
0.28
Shear Modulus
76 GPa 11 x 106 psi
Shear Strength
620 MPa 91 x 103 psi
Tensile Strength: Ultimate (UTS)
1020 MPa 150 x 103 psi
Tensile Strength: Yield (Proof)
810 MPa 120 x 103 psi
Thermal Properties
Latent Heat of Fusion
280 J/g
Maximum Temperature: Corrosion
450 °C 840 °F
Maximum Temperature: Mechanical
820 °C 1510 °F
Melting Completion (Liquidus)
1450 °C 2640 °F
Melting Onset (Solidus)
1410 °C 2560 °F
Specific Heat Capacity
470 J/kg-K 0.11 BTU/lb-°F
Thermal Conductivity
16 W/m-K 9.5 BTU/h-ft-°F
Thermal Expansion
11 µm/m-K
Electrical Properties
Electrical Conductivity: Equal Volume
2.2 % IACS
Electrical Conductivity: Equal Weight (Specific)
2.5 % IACS
Otherwise Unclassified Properties
Base Metal Price
15 % relative
Density
7.9 g/cm3 490 lb/ft3
Embodied Carbon
3.2 kg CO2/kg material
Embodied Energy
45 MJ/kg 19 x 103 BTU/lb
Embodied Water
130 L/kg 15 gal/lb
Common Calculations
PREN (Pitting Resistance)
19
Resilience: Ultimate (Unit Rupture Work)
160 MJ/m3
Resilience: Unit (Modulus of Resilience)
1660 kJ/m3
Stiffness to Weight: Axial
14 points
Stiffness to Weight: Bending
25 points
Strength to Weight: Axial
36 points
Strength to Weight: Bending
29 points
Thermal Diffusivity
4.4 mm2/s
Thermal Shock Resistance
34 points
Alloy Composition
| Fe | 72.6 to 79.5 | |
| Cr | 13 to 15 | |
| Ni | 5.0 to 6.0 | |
| Mo | 1.2 to 2.0 | |
| Cu | 1.2 to 2.0 | |
| Mn | 0 to 1.0 | |
| Nb | 0.15 to 0.6 | |
| Si | 0 to 0.7 | |
| C | 0 to 0.070 | |
| P | 0 to 0.040 | |
| S | 0 to 0.015 |
All values are % weight. Ranges represent what is permitted under applicable standards.
Followup Questions
Further Reading
Machining of Stainless Steels and Super Alloys: Traditional and Nontraditional Techniques, Helmi A. Youssef, 2016
EN 10088-3: Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
EN 10088-1: Stainless steels - Part 1: List of stainless steels
Welding Metallurgy of Stainless Steels, Erich Folkhard et al., 2012
Corrosion of Stainless Steels, A. John Sedriks, 1996
Advances in Stainless Steels, Baldev Raj et al. (editors), 2010