Soft Annealed (O60) C61400 Bronze
O60 C61400 bronze is C61400 bronze in the O60 (soft annealed) temper. The graph bars on the material properties cards below compare O60 C61400 bronze to: wrought bronzes (top), all copper alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
Mechanical Properties
Elastic (Young's, Tensile) Modulus
110 GPa 17 x 106 psi
Elongation at Break
39 %
Poisson's Ratio
0.34
Shear Modulus
43 GPa 6.2 x 106 psi
Shear Strength
370 MPa 53 x 103 psi
Tensile Strength: Ultimate (UTS)
540 MPa 78 x 103 psi
Tensile Strength: Yield (Proof)
220 MPa 32 x 103 psi
Thermal Properties
Latent Heat of Fusion
220 J/g
Maximum Temperature: Mechanical
220 °C 420 °F
Melting Completion (Liquidus)
1050 °C 1910 °F
Melting Onset (Solidus)
1040 °C 1910 °F
Specific Heat Capacity
420 J/kg-K 0.1 BTU/lb-°F
Thermal Conductivity
67 W/m-K 39 BTU/h-ft-°F
Thermal Expansion
18 µm/m-K
Electrical Properties
Electrical Conductivity: Equal Volume
14 % IACS
Electrical Conductivity: Equal Weight (Specific)
15 % IACS
Otherwise Unclassified Properties
Base Metal Price
28 % relative
Density
8.5 g/cm3 530 lb/ft3
Embodied Carbon
3.0 kg CO2/kg material
Embodied Energy
48 MJ/kg 21 x 103 BTU/lb
Embodied Water
360 L/kg 44 gal/lb
Common Calculations
Resilience: Ultimate (Unit Rupture Work)
170 MJ/m3
Resilience: Unit (Modulus of Resilience)
210 kJ/m3
Stiffness to Weight: Axial
7.5 points
Stiffness to Weight: Bending
19 points
Strength to Weight: Axial
18 points
Strength to Weight: Bending
17 points
Thermal Diffusivity
19 mm2/s
Thermal Shock Resistance
18 points
Alloy Composition
| Cu | 86 to 92.5 | |
| Al | 6.0 to 8.0 | |
| Fe | 1.5 to 3.5 | |
| Mn | 0 to 1.0 | |
| Zn | 0 to 1.0 | |
| P | 0 to 0.015 | |
| Pb | 0 to 0.010 | |
| res. | 0 to 0.5 |
All values are % weight. Ranges represent what is permitted under applicable standards.
Followup Questions
Further Reading
ASTM B169: Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar
ASM Specialty Handbook: Copper and Copper Alloys, J. R. Davis (editor), 2001