MakeItFrom.com
Menu (ESC)

296.0 Aluminum vs. SAE-AISI M6 Steel

296.0 aluminum belongs to the aluminum alloys classification, while SAE-AISI M6 steel belongs to the iron alloys. There are 21 material properties with values for both materials. Properties with values for just one material (10, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 296.0 aluminum and the bottom bar is SAE-AISI M6 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 72
200
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 27
77
Tensile Strength: Ultimate (UTS), MPa 260 to 270
840 to 2210

Thermal Properties

Latent Heat of Fusion, J/g 420
260
Melting Completion (Liquidus), °C 630
1560
Melting Onset (Solidus), °C 540
1510
Specific Heat Capacity, J/kg-K 870
440
Thermal Conductivity, W/m-K 130 to 150
17
Thermal Expansion, µm/m-K 22
12

Otherwise Unclassified Properties

Base Metal Price, % relative 11
39
Density, g/cm3 3.0
8.4
Embodied Carbon, kg CO2/kg material 7.8
8.0
Embodied Energy, MJ/kg 150
120
Embodied Water, L/kg 1110
160

Common Calculations

Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 46
23
Strength to Weight: Axial, points 24 to 25
28 to 73
Strength to Weight: Bending, points 30 to 31
24 to 45
Thermal Diffusivity, mm2/s 51 to 56
4.7
Thermal Shock Resistance, points 12
26 to 68

Alloy Composition

Aluminum (Al), % 89 to 94
0
Carbon (C), % 0
0.75 to 0.85
Chromium (Cr), % 0
3.8 to 4.5
Cobalt (Co), % 0
11 to 13
Copper (Cu), % 4.0 to 5.0
0
Iron (Fe), % 0 to 1.2
68.8 to 74.6
Magnesium (Mg), % 0 to 0.050
0
Manganese (Mn), % 0 to 0.35
0.15 to 0.4
Molybdenum (Mo), % 0
4.5 to 5.5
Nickel (Ni), % 0 to 0.35
0
Phosphorus (P), % 0
0 to 0.030
Silicon (Si), % 2.0 to 3.0
0.2 to 0.45
Sulfur (S), % 0
0 to 0.030
Titanium (Ti), % 0 to 0.25
0
Tungsten (W), % 0
3.8 to 4.8
Vanadium (V), % 0
1.3 to 1.7
Zinc (Zn), % 0 to 0.5
0
Residuals, % 0 to 0.35
0