MakeItFrom.com
Menu (ESC)

710.0 Aluminum vs. C11600 Copper

710.0 aluminum belongs to the aluminum alloys classification, while C11600 copper belongs to the copper alloys. There are 29 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 710.0 aluminum and the bottom bar is C11600 copper.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
120
Elongation at Break, % 2.2 to 3.6
2.7 to 50
Poisson's Ratio 0.32
0.34
Shear Modulus, GPa 26
43
Shear Strength, MPa 180
160 to 240
Tensile Strength: Ultimate (UTS), MPa 240 to 250
230 to 410
Tensile Strength: Yield (Proof), MPa 160
77 to 410

Thermal Properties

Latent Heat of Fusion, J/g 380
210
Maximum Temperature: Mechanical, °C 170
200
Melting Completion (Liquidus), °C 650
1080
Melting Onset (Solidus), °C 610
1030
Specific Heat Capacity, J/kg-K 870
390
Thermal Conductivity, W/m-K 140
390
Thermal Expansion, µm/m-K 24
17

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 35
100
Electrical Conductivity: Equal Weight (Specific), % IACS 110
100

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
35
Density, g/cm3 3.0
9.0
Embodied Carbon, kg CO2/kg material 8.0
2.7
Embodied Energy, MJ/kg 150
42
Embodied Water, L/kg 1130
390

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 4.9 to 7.9
9.7 to 91
Resilience: Unit (Modulus of Resilience), kJ/m3 180 to 190
25 to 710
Stiffness to Weight: Axial, points 13
7.2
Stiffness to Weight: Bending, points 46
18
Strength to Weight: Axial, points 23
7.2 to 13
Strength to Weight: Bending, points 29
9.4 to 14
Thermal Diffusivity, mm2/s 53
110
Thermal Shock Resistance, points 10 to 11
8.2 to 15

Alloy Composition

Aluminum (Al), % 90.5 to 93.1
0
Copper (Cu), % 0.35 to 0.65
99.78 to 99.915
Iron (Fe), % 0 to 0.5
0
Magnesium (Mg), % 0.6 to 0.8
0
Manganese (Mn), % 0 to 0.050
0
Silicon (Si), % 0 to 0.15
0
Silver (Ag), % 0
0.085 to 0.12
Titanium (Ti), % 0 to 0.25
0
Zinc (Zn), % 6.0 to 7.0
0
Residuals, % 0
0 to 0.1