MakeItFrom.com
Menu (ESC)

EN 1.4301 Stainless Steel vs. 3104 Aluminum

EN 1.4301 stainless steel belongs to the iron alloys classification, while 3104 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4301 stainless steel and the bottom bar is 3104 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
70
Elongation at Break, % 14 to 46
1.1 to 20
Fatigue Strength, MPa 200 to 330
74 to 130
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 77
26
Shear Strength, MPa 430 to 550
110 to 180
Tensile Strength: Ultimate (UTS), MPa 610 to 900
170 to 310
Tensile Strength: Yield (Proof), MPa 220 to 570
68 to 270

Thermal Properties

Latent Heat of Fusion, J/g 290
400
Maximum Temperature: Mechanical, °C 940
180
Melting Completion (Liquidus), °C 1430
650
Melting Onset (Solidus), °C 1380
600
Specific Heat Capacity, J/kg-K 480
900
Thermal Conductivity, W/m-K 15
160
Thermal Expansion, µm/m-K 16
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.4
41
Electrical Conductivity: Equal Weight (Specific), % IACS 2.7
130

Otherwise Unclassified Properties

Base Metal Price, % relative 15
9.5
Density, g/cm3 7.8
2.8
Embodied Carbon, kg CO2/kg material 3.0
8.4
Embodied Energy, MJ/kg 43
150
Embodied Water, L/kg 140
1180

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 110 to 220
1.6 to 60
Resilience: Unit (Modulus of Resilience), kJ/m3 120 to 820
34 to 540
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 25
50
Strength to Weight: Axial, points 22 to 32
17 to 31
Strength to Weight: Bending, points 20 to 27
25 to 37
Thermal Diffusivity, mm2/s 4.0
64
Thermal Shock Resistance, points 14 to 20
7.6 to 13

Alloy Composition

Aluminum (Al), % 0
95.1 to 98.4
Carbon (C), % 0 to 0.070
0
Chromium (Cr), % 17.5 to 19.5
0
Copper (Cu), % 0
0.050 to 0.25
Gallium (Ga), % 0
0 to 0.050
Iron (Fe), % 66.8 to 74.5
0 to 0.8
Magnesium (Mg), % 0
0.8 to 1.3
Manganese (Mn), % 0 to 2.0
0.8 to 1.4
Nickel (Ni), % 8.0 to 10.5
0
Nitrogen (N), % 0 to 0.1
0
Phosphorus (P), % 0 to 0.045
0
Silicon (Si), % 0 to 1.0
0 to 0.6
Sulfur (S), % 0 to 0.015
0
Titanium (Ti), % 0
0 to 0.1
Vanadium (V), % 0
0 to 0.050
Zinc (Zn), % 0
0 to 0.25
Residuals, % 0
0 to 0.15

Comparable Variants